Cerakote Engraved Titanium Shop Tools

Cerakote Engraved Titanium Shop Tools

$ 470.00
/
Free US Shipping Over $99

Customizations Total: $ 0.00

An ultra-light 3D-printed Titanium toolset with custom engraving (15 characters max.) and a black cerakote finish to keep the weight down for the traveling mechanic. Save over 1 pound in these tools.
  • Free US Shipping Over $99
  • 30 Day Returns
  • Unmatched Support

• 80g Chain Whip
• 45g Lockring Tool
• 160g Hammer
• 11s Chain
• Shimano/SRAM Compatible
• Campagnolo Compatible
• 3D printed 6Al/4V Titanium
• Not Cheater Bar Compatible
• Titanium Hammer Side
• Hard Rubber Side
• 125g of fine stainless steel and fine
tungsten grit

25 Year Warranty
SILCA SHIELD WARRANTY
We understand bad luck and unfortunate circumstances, and would like to help you out. SILCA-Shield is our exclusive warranty coverage for Ultimate Level products and is THE most comprehensive warranty in all of cycling.
25 Year Hard Parts Guarantee - You break any hard part, we'll replace or repair it.  This is not a typical 'manufacturers defect' but any failure of any hard part in regular use. For 25 years, 1 Year No Fault - No questions asked repair or replacement to correct functional damage regardless of cause. Extend this to 2 Years No Fault - No questions asked by registering your product within 60 days of purchase here. 
SILCA Limited 2 year coverage for all rubber, leather and gauge parts.
    Engraved Tools are not eligible for returns

    Titanium Chain Whip

    3D printed in hardened 6/4 Ti, this chain whip weights only 80 grams including 8 links of TiN YBN 11 speed chain.  The whip handle contains spiral riffling reminiscent of Columbus SLX tubing and the whip head is fully hollow with internal gussets.  At 11 inches long, this whip is designed for well maintained bikes and is NOT compatible with cheater bars!

     

    Ultralight Titanium Lockring Tool

    3D printed in hardened 6/4 Ti, this lockring tool weighs only 45 grams.  The handle is printed with spiral rifle reinforcements inspired by Columbus SLX tubing, and the tool head has 2 spline patterns to accommodate both Shimano/SRAM and Campagnolo lockrings.  While not as hard as tool steel, hardened 6/4 is harder and stronger than the steels used in many traditional cycling tools, and is 4-6 times harder and stronger than the aluminum used in high end lockrings.  Just as with it's matching chain whip, this tool is designed to be used on well maintained bikes and is NOT compatible with cheater bars

     

    Titanium Machinist Hammer

    Repeat after me, that pedal wrench is NOT a hammer!  Every pro mechanic I know carries a machinist hammer, and over the years, most of these have gone titanium to save weight in the tool case.  This hammer is 3D printed in hardened 6/4 Titanium with a hollow head that we fill with 125 grams of fine stainless steel and fine tungsten grit, giving it higher impact energy than a solid titanium head, while also eliminating any recoil.  The hammer head is hard titanium on one side and medium hard rubber on the other for use on delicate surfaces.  

    Disclaimer

    As with all paint processes, Cerakote is created in batches. One batch can be slightly darker or lighter than another. One batch may have a bit more gloss than the other. This is due to the way the paint is processed and a very slight variation in the mix can cause slight variations in color or gloss