StripChip

£24.00
/
Eliminate the need for any harsh cleaners or degreasers to wax your chain. Drop a single StripChip square into your hot wax, let your chain wax for 10 minutes, and hang to dry. Reuse the same pot of wax for future waxings

• Fórmula basada en cera de oleogelation
• Elimina la necesidad de desgraseros duros
• Use un chip por nueva cadena con grasa de fábrica
• Convierte la grasa en una sustancia como cera
• No hay caída en el rendimiento
• Va de la cadena en el paquete de fábrica a la cadena encerada en 10 minutos

Limited Warranty

GARANTÍA LIMITADA DE SILCA

La Garantía limitada de SILCA cubre aquellas piezas que se consideran sujetas a desgaste por el uso normal, o consumibles que sufren degradación a lo largo del uso diario. SILCA garantiza que están libres de defectos de fabricación durante 2 años.

    Se acabó la preparación con desengrasantes: StripChip elimina la necesidad de desengrasar las cadenas nuevas de fábrica. Con StripChip, la cadena va directamente a la cera caliente para una preparación sencilla.

    Tecnología avanzada: Cada pieza de aditivo desengrasante StripChip se une a la grasa de fábrica de las cadenas nuevas y la convierte en cera. Esta avanzada tecnología de SILCA ahorra tiempo y dinero, garantizando un sistema de transmisión limpio, silencioso y ultraeficiente.

    Formato práctico: StripChip se vende en un formato de tableta (similar a una chocolatina) con seis piezas de 12 gramos. Una sola pieza por cadena elimina con eficacia la grasa de fábrica para que la cera caliente penetre en los pasadores y rodillos internos.

    Aplicación sencilla: StripChip se integra a la perfección con la cera fundida en caliente SILCA Super Secret Chain Blend. Sigue los pasos básicos para obtener unos resultados óptimos y simplificar el mantenimiento de forma significativa.

    Rendimiento optimizado: StripChip funciona mejor con la cera de fundido en caliente SILCA Super Secret Chain Blend, una combinación que asegura la mayor rapidez y resistencia para el sistema de transmisión. Disfruta de más rendimiento, menos fricción y un desgaste mínimo en cada salida.

    Safety Data Sheet

    Frequently asked questions

    What temperature should I heat my wax to when using StripChip?

    When using StripChip, please ensure that your wax reaches 125°C. This is the activation temperature of this product. Once your chain has been submerged in this wax blend for 10 minutes at 125°C, you will want to lower the temperature of your wax to 75°C for an additional 10 minutes before removing your chain and allowing it to cool and dry.

    Can I use StripChip with other wax addatives?

    Yes! You may use StripChip with either our Endurance Chip or Speed Chip. Please just ensure that you are folowing the StripChip instructions as it does require a higher activation temperature.

    How many chains can I wax with StripChip?

    Each piece off of the StripChip bar is compatible with one standard sized factory-new chain. Each full bar of StripChip can strip a total of six standard sized factory-new chains. If you are using an extended chain for a recumbent or tandem, please use two-three pieces of StripChip (depending on the total length of the chain) for the best results.

    How many applications of StripChip can I use in my wax?

    You can use a total of 6 applications (one full bar of StripChip) in 250-300g of wax. Once you have used a total of six applications of StripChip in your wax blend, you may continue to use this wax for any re-waxes or waxing of chains that were stripped separatly. Once you are ready to use a 7th application of StripChip, please start with fresh new wax.

    Can I use StripChip with the sous vide method?

    No. StripChip can not be used when waxing using the sous vide method. This product must reach a temperature of 125°C to be activated and this temperature can not be reached when using this method.

    When should I choose StripChip instead of Chain Stripper?

    Our StripChip is designed to be compatible to strip any factory new chain in your hot wax! This allows you to skip the manual step of stripping your chain with our Chain Stripper. If you are looking to clean a chain that was previously used, please use Chain Stripper as opposed to StripChip.

    Can I use StripChip with any chain wax?

    StripChip was designed to work with Secret Chain Blend. It is likely that it will work with other waxes but has not been tested with all waxes available on the market.

    Do I still need to degrease my chain before using StripChip?

    No. StripChip removes factory grease and waxes your chain in one step.

    How long does the StripChip process take?

    About 10 minutes! Just drop your chain in hot wax with a StripChip and it’s ready.