Kettenwachs-System – EU-Stecker

  • Ships from The Netherlands
  • Order by 15:00 and Ships Same Day
Benachrichtigen Sie mich, wenn Sie auf Lager sind
Normaler Preis€119,00
/

The SILCA Chain Waxing System is a complete solution for at-home chain waxing. Featuring a PID-controlled 600 ml melter for precise temperature management, a mess-free drip stand, and a cable coupler, the system is compact and retains wax drips back in the pot to prevent waste. By utilizing the included cable coupler and streamlined heating process, you can achieve a clean, efficient drivetrain in a single step without the need for degreasers.

• Kabelkoppler
• Infusionsständer
• Elektrisches Wachswärmer
• 600 ml Wachskapazität
• Temperaturbereich: 75-125ºC
• 14 "x 8,5" x 9 "
• Europäischer Stecker
• 220V
• Hinweis: Das System enthält kein Wachs

Limited Warranty

BESCHRÄNKTE SILCA-GARANTIE

Komponenten, die unter die beschränkte SILCA-Garantie fallen, sind Teile, die durch den normalen Gebrauch einem natürlichen Verschleiß unterliegen oder als Verbrauchsmaterialien durch die tägliche Nutzung einer Abnutzung unterliegen. SILCA garantiert für einen Zeitraum von 2 Jahren, dass diese Produkte frei von Herstellungsfehlern sind.

    Das Ultimate Chain Waxing System ist dein kompaktes Set für das professionelle Heißwachsen deiner Ketten zu Hause. Mit dem Wachserhitzer, dem Abtropfständer und der Eintauchhilfe bist du sofort startklar für einen extrem sauberen, leisen und effizienten Antrieb.

    Der Erhitzer verfügt über einen belüfteten, transparenten Deckel, der die Wärme speichert, während du jederzeit prüfen kannst, ob das Wachs bereits vollständig geschmolzen ist. In Kombination mit dem StripChip ist dieses System der perfekte Begleiter, um deine Kette in einem einzigen Schritt zu wachsen – ganz ohne vorheriges Entfetten.

    Für maximale Genauigkeit setzen wir auf einen PID-Controller statt auf ein herkömmliches Thermostat. Das bedeutet, dass das Wachs exakt auf die vorgegebene Temperatur erhitzt wird, ohne das Risiko des Überhitzens, wie es bei einfachen Schongarern oft der Fall ist. Um den Schmelzvorgang zu beschleunigen, empfehlen wir eine Temperatur von 125 °C. Sobald das Wachs flüssig ist, senkst du die Temperatur für den eigentlichen Wachsvorgang auf 75 °C ab. So erreichst du die schnellstmögliche Anwendung.

    Der integrierte Abtropfständer sorgt für eine saubere Trocknungsphase: Überschüssiges Wachs tropft direkt zurück in den Topf und steht für den nächsten Einsatz bereit. Die gekerbte Basis hält den Erhitzer und die Eintauchhilfe sicher an ihrem Platz. Die Eintauchhilfe mit ihrem einseitig verschraubbaren Stahlkabel ermöglicht es dir, die Kette sicher einzuspannen, einzutauchen und zu bewegen – ganz ohne das heiße Wachs zu berühren oder Flecken zu hinterlassen.

    Betreibe dieses Gerät niemals, wenn das Kabel oder der Stecker beschädigt ist, wenn es nicht einwandfrei funktioniert, wenn es fallen gelassen, in irgendeiner Weise beschädigt oder in Wasser getaucht wurde. Achte darauf, dass das Gerät nicht in die Hände von Kindern gelangt. Eine sorgfältige Aufsicht ist bei der Verwendung in der Nähe von Kindern zwingend erforderlich.

    Frequently asked questions

    How do I switch the system between Farenheit and Celcius?

    If your system gets switched from farenheit to celcius, please press and hold the power button to switch back.

    What is included with my purchase?

    When purchasing a Chain Waxing System, you will receive your wax melter, chain coupler, and chain hanging stand. This does not include any wax or wax additives. These can be purchased separately.

    What voltage is my system?

    Our standard Wax System (US/CAN plug) is 110V while our UK,EU, and AUS systems are 220V.

    Is the metal pot removable?

    Unfortunately, the metal bowl in this system is not removable. If you are looking to switch between two wax blends, allow the wax in the bowl to fully cool. Then, turn the melter on low for a few moments. Allow just the edges of the wax to melt. You can then remove this "puck" of wax. You can then switch between these pucks when looking to wax with different blends!

    How many chains can be waxed at once?

    This system is designed to hold one standard bike chain. If you are waxing a longer chain for a trike, tandem, etc. you may want to consider waxing your chain using an alternative method.

    Why does my system show that it has reached the pre-set temperature before all of the wax has melted?

    You may notice a delay between the temperature display and the melting of your wax in this system. This is because the temperature gauge in this system is on the outside of the metal bowl, which means the wax that is touching the metal bowl actually is that hot and will reach 75°C much sooner than the middle. Unfortunately, this is the closest that we could get this gauge. All of the wax in your system should reach your desired temperatre that is refelcted on the display with in ten minutes of the correct temperature being displayed.

    Can I store my wax in this system?

    Yes, we recommend that you leave your used wax in this system. You can then re-heat and re-use this wax for your next new chain or re-wax!

    How much wax should I put in my system?

    We recommend adding around half of your bag of Hot Wax to this system or around 250g to help prevent overflow.

    What’s included in the Chain Waxing System kit?

    Included in the kit is a wax warmer, chain coupler, and hanging stand. Wax and chain stripper is not included.

    How precise is the heating system?

    The temperature is PID controlled meaning the heating element will go to the prescribed temperature. This means it will have a slight variation throughout the pot as it is heated from the outside of the pot, but it will be within 2-3C of the displayed temperature after the wax has had time to heat evenly.

    How does the wax-catch setup work?

    All excess wax will drip back into the pot for the most efficient waxing set up possible.

    Is using this system cleaner than other waxing methods?

    Yes, the ability to easily hang the chain directly above the wax pot means you virtually eliminate spills, drips, etc from your waxing routine.