Chain Stripper

Size
$64.95
/
Completely strip and prep your chain for wax in 10 minutes. Submerge the chain or even just drip it on the chain, rinse, and apply super secret. Take all the work and harsh chemicals out of chain waxing!

• Biodegradable ingredients
• Cleans chain in 10 minutes
• Improves wax treatment adhesion
• Can be used on new or used chain
• Strip chain on or off bike
• Made in USA

Limited Warranty

SILCA LIMITED WARRANTY 

Parts covered by SILCA Limited Warranty are considered to be subject to wear through normal use or are consumable subject to degradation through the course of their daily use.  SILCA guarantees them free from manufacturer defects for 2 years.

     

    Far and away, the largest hurdle for people converting to a waxed drivetrain has always been the need to completely strip the factory lubricant from the chain in order for the wax to properly adhere. Traditional methods have involved using 2-3 different solvents and rinse steps, moving from non-polar solvents that thin greases and oils to progressively more polar solvents that evaporate quickly to eliminate residues.

    For the design of SILCA Chain Stripper, we started from the end and worked backwards, identifying chemicals which drive out greases and oils while promoting wax adhesion to metal. The result is an organic cleaner that lifts and encapsulates greases and oils allowing them to easily be rinsed away from the metal surface. The result is the world's first wax optimized chain cleaner which not only removes greases and oils, but actually primes the metal surface for improved adhesion from wax lubricants.

    The aggressive 'lift and encapsulate' action of SILCA chain stripper allows for 2 quick and easy cleaning options.

    Option 1: For hot-melt waxing a new, factory chain with SILCA Secret Blend Hot Melt, simply immerse the chain in the Stripper and agitate 30 seconds. Allow to sit for 5-10 minutes and agitate again for 30 seconds. Remove the chain from the Stripper and rinse with water and then drop the chain directly into the hot wax, the water will boil off within a few minutes and the chain will be fully waxed with up to 30% longer application life than a chain cleaned by traditional methods.

    Option 2: For drip applied waxing of a new or nearly new chain with SILCA Super Secret without removing the chain from the bicycle. Apply 1 drop of SILCA Chain Stripper to each roller of the chain while backpedalling. Allow to soak for 5 minutes. Backpedal 10 revolutions of the crank to agitate cleaner and re-apply 1 drop per roller allowing to sit for 5 more minutes. Rinse with clean water while backpedalling at least 10 revolutions.

    What is it: SILCA Chain Stripper is a highly concentrated, biodegradable degreaser combined with a wax adhesion promoter (primer) which allows for fast, single step preparation of factory chains for waxing while also improving wax adhesion and increasing longevity. SILCA Chain Stripper reduces the time and number of chemicals required to properly prep a factory greased chain to less than 10 minutes and can even be used to prepare chains on bicycle for drip wax application.
    Safety Data Sheet

    Frequently asked questions

    What types of chains can be cleaned with this Chain Stripper?

    Chain Stripper can be used to strip and clean any factory new chains or any chains that have been used with a traditional oil based lubricant.

    How do I clean my chain for Hot Waxing with Chain Stripper?

    Place your chain in a plastic bottle with 1oz of Chain Stripper. Shake and agitate for 30 seconds. Allow your chain to to sit for 5-10 minutes in the bottle and then and agitate again for 30 seconds. Remove the chain from the Stripper and rinse with cold water 1-2 times and then drop the chain directly into the hot wax, the water will boil off within a few minutes

    How do I clean my chain for Super Secret Drip Lube with Chain Stripper?

    Apply 1 drop of Chain Stripper to each roller of the chain while backpedalling. Allow to soak for 5 minutes. Backpedal 10 revolutions of the crank to agitate cleaner and re-apply 1 drop per roller allowing to sit for 5 more minutes. Rinse with clean water while backpedalling at least 10 revolutions.

    How do I filter this Chain Stripper to reuse it?

    Chain Stripper can be filtered and reused. We recommend that you filter this product back into the bottle through a coffee filter. You may notice that the remaining Chain Stripper will be a slightly dark or cloudy color. This is normal and does not mean that this product has been contaminated.

    Can I use this Chain Stripper in an ultrasonic cleaner?

    Yes, you can use Chain Stripper in an ultrasonic cleaner, but it has not been tested to improve the preformace. If you do choose to use this in your ultrasonic cleaner, please do not heat it over 100°F.

    How many chains can I strip with one bottle of Chain Stripper?

    One bottle of Chain Stripper can be used to clean around 15 chains. If you filter and reuse this product, you can clean around 20 chains.

    Should I clean my cassette with this Chain Stripper?

    Chain Stripper can be used to clean components like your cassette, but you may find it more convenient to use our Brake and Drivetrain cleaner. You should clean your cassette before using Hot Wax.

    Is Chain Stripper safe for all types of chains?

    Yes, chain stripper is safe for all types of chains.

    Can I use this on a previously used chain?

    Yes Chain Stripper can be used on used chains. It may take more baths than one or two like a new chain, but it will work great on a used chain.

    Does Chain Stripper leave any residue?

    If rinsed well there is very little residue left behind on the chain. That residue is actually an agent that will help wax adhesion to the chain so it is ideal to have a small amount left behind.