T-Ratchet + Ti-Torque Kit 2nd Generation - SILCA
T-Ratchet + Ti-Torque Kit 2nd Generation - SILCA
T-Ratchet + Ti-Torque Kit 2nd Generation - SILCA
T-Ratchet + Ti-Torque Kit 2nd Generation - SILCA

T-Ratchet + Ti-Torque Kit 2nd Generation

Regular price$ 120.00
185 reviews

Never worry about adjusting your bicycle components incorrectly again with this highly accurate mobile torque wrench. Over 70% of carbon failures happen on the go and that doesn't need to happen!

• Ti-Torque beam measuring 2-8nm
• 72 tooth ratchet mechanism
• Steel bit extender
• S2 Steel hex bits: 2, 2.5, 3, 4, 5, 6mm
• S2 Steel Torx bits: t10, t20, t25
• S2 Steel 2mm Phillips head bit
• Duck waxed canvas case 120x70x30mm
• 220g including case

Lifetime Warranty


The SILCA Lifetime Warranty covers products from manufacturing defects for the lifetime of the user.  It further covers the function of all hard parts for 7 years from the date of purchase.  Expected wear and tear is not covered.  Learn more about warranties.

     Roughly 70%* of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you’ve reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you’ll hardly notice it’s there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to ratchet, to ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package.


       *Based on 12 year data set from one of the largest manufacturers of carbon bar/stem/seatposts.

      Updated Tri-scale Torque Tube
      torque wrench on stem
      t-ratchet extender
      Customer Reviews
      4.9 Based on 185 Reviews
      5 ?
      4 ?
      3 ?
      2 ?
      1 ?
      Customer Photos
      Write a Review Ask a Question

      Thank you for submitting a review!

      Your input is very much appreciated. Share it with your friends so they can enjoy it too!

      Filter Reviews:
      David D.
      Compact and well-finished

      Easy and quick to handle and re-configure as you move around the bike. It can reach into those awkward places like through bottle cages. I don't know that you would call it 'superlight' - I don't think I'm going to carry this kit riding rather than some other multi-tool - but it feels fantastic to use, keeps the (good quality) bits organized, and is, well... handy.

      SILCA T-Ratchet + Ti-Torque Kit 2nd Generation Review
      Mark C.
      United States United States
      Great tool!

      Great tool! Well made, and will be in my bike tool box or in my saddle bag. Versatile for applying the right torque in difficult places. Took a minute to figure out how to use the tool, and wish a video on actual using the tool. If you ever used a torque wrench, you usually dial in the torque, and then tighten the fastener until you hit torque (the tool will then clicks(or vibrate/beep/ light up on higher end electronic wrenches)). Yes, some torque wrenches have a dial, and you tighten fastener and watch dial until you hit desired torque - just not instructions on how to use tool in box and I could not find one video of someone actually torqueing a fastener with it (just talking about tool). This one you just tighten fastener until the needle reaches desired torque (need your reading glasses for that). Probably need to tell people to be careful about over-torqueing the tool in the video (and try to torque on a pull stroke not a push), as it appears easy to over-torque this tool (such low torque values). I do not know if this one can be repaired if over-torqued or not? Most analogue torque wrenches go into metal recycle pile if over-torqued, and I have had several end up in the metal recycle pile! Not fun to do that with a $250 dollars Snap-on analogue wrench. One of the reason I have switched to digital torque wrenches, but do not like the $350+ price tag! Still a great tool for low torque applications on carbon fiber bikes. Will probably order another!

      Beautiful as it is functional.

      Great quality, craftsmanship and material. Easily fits into a small saddle bag. Purchased from REI.

      Peter G.
      United States United States
      road kit

      nice tolerance, everything needed, quite light

      Peter R.
      United States United States

      Pre is ion tools. Compact & efficient.