SILCA Tubeless System Installation

Start with SILCA Ultimate Tubeless Sealant w/FiberFoam Technology

  1. Install Tensilized Polypropeline rime tape (tape without printing)
  2. Install your tubeless valve
  3. Install one bead of your tire on the rim
  4. Mount the second bead while leaving a few inches at the valve to pour sealant
  5. Pour the corresponding amount of sealant into the tire 
  6. Rotate the tire slowly so the sealant is opposite the valve being careful not to spill any sealant
  7. Mount the last portion of the tire
  8. Inflate (this may require compressed air depending on tire/rim combination)
  9. Go Ride
SILCA replenishment schedule

Replenishment Schedule with SILCA Ultimate Tubeless Sealant Replenisher

  1. Every 3 months, deflate the tire completely
  2. Remove the valve core
  3. Inject the corresponding amount of SILCA Ultimate Tubeless Sealant Replenisher as seen in the graph above
  4. Re-Install the valve core
  5. Inflate the tire with your floor pump
  6. Go Ride

After one year from the initial installation of SILCA Ultimate Tubeless Sealant w/FiberFoam we recommend cleaning out the tire and starting the system over again.